Embellish® Sticky Rinse-Away Mesh is a dense fibrous, water-soluble stabilizer with a light, sticky dissolvable coating and is used for items that are distinguished as “hard to hoop” or fabrics that could be harmed/ marked by the hooping process such as: baby onesies, necklines, collars, and cuffs. Embellish® Sticky Rinse- Away Mesh washes away clean with no messy residue and is excellent for supporting embroidery on delicate and sheer fabrics such as: batiste, chiffon, netting, organdy, organza, tulle, voile and sheer scarfs. The added adhesive prevents the fabric from shifting while embroidering, resulting in perfect outline stitches. Unlike other water-soluble stabilizers that are clear, the mesh properties of this stabilizer are not prone to stretching from embroidering dense designs with heavy needle penetration. Also available in a non-sticky version, Embellish® Rinse-Away Mesh.

Contents:

Proprietorial high-density per square inch, fibrous, woven, water-soluble fibers. Contains a pressuresensitive, needle-friendly, water-dissolvable coating.

Stitch Count:

Holds up to 12,000 embroidery stitches in a 4”x 4” hoop.

To Use:

1. Hoop one piece of Embellish® Sticky Rinse-Away Mesh with the release paper (shiny side) facing up.
2. Draw an “X” on the surface with the Embellish® Vinyl Weeding Tool, taking care not to puncture the stabilizer. This will perforate the release paper so it can easily be torn away, exposing the sticky surface.
3. Finger-press the wrong side of the item to the sticky surface and smooth out the wrinkles.
4. If the design has more than 12,000 stitches in a 4” x 4” hoop, “float” a piece of Embellish® Rinse-Away Mesh under the hoop for added support. *Note – If sticking down a garment such as a baby onesie or T-Shirt, prep the piece with the proper/recommended Embellish® stabilizer before sticking it down.
5. It is recommended to slow the speed of your machine to “600” stitches per minute.
6. Add an embroidery topper on top of the hooped item (either Embellish® Rinse-Away Clear Topper or Embellish® Iron-Away Clear Topper).
7. Embroider the design. If your machine has an auto-baste function, it is recommended to baste the design and topper before embroidering.

To Remove:

1. Remove the material from the hoop.
2. Pull back and trim away as much of the stabilizer as possible.
3. Soak the material in room temperature, soft water and change the water often until all the stabilizer and adhesive dissolves. Once the stabilizer and adhesive are dissolved, do a final rinse under room temperature, running water.

Important – It is necessary to use “soft” water to get optimal rinse results. If your water is hard or has high mineral deposits, it may be necessary to add a water softener to the bath while soaking your garment.

Laundering and Care:

Launder and dry the item according to the fabric material fiber content.

The post Sticky Rinse Away Mesh appeared first on RNK Distributing.

Embellish® Rinse-Away Mesh is a dense, fibrous, water-soluble stabilizer and is used for free-standing lace designs or with any design that requires a stabilizer to rinse away clean. It is perfect for making decorative pins or 3-D embroidery. Unlike other water-soluble stabilizers that are clear, the mesh properties of this stabilizer are not prone to stretching from embroidering dense designs with heavy needle penetration. It works great when trimmed into strips for rolled-edge serger hemlines, and save your “left over” pieces for use as a topping or base for mending! Also available in a sticky version for hard to hoop delicates. Note – Not all embroidered lace is considered “Free Standing.” If your desire is to have the piece stand on its own, please make sure that the packaging states that the design is for “Free Standing Lace”. If you have any doubt it’s free-standing, include one layer of nylon organza in the embroidery frame with the Embellish® Rinse-Away Mesh.

Contents:

Proprietorial high-density per square inch, fibrous, woven, water-soluble fibers.

Stitch Count:

Holds up to 12,000 embroidery stitches in a 4”x4” hoop.

To Use:

1. Cut a piece at least one inch larger than the outer perimeter of the embroidery design to ensure proper stabilization.
2. Hoop one layer of Embellish® Rinse-Away Mesh, making sure the stabilizer is taut.
3. If the design has more than 12,000 stitches in a 4” x 4” area or if you are not familiar with the quality of the digitizing, hoop two layers.
4. It is recommended to slow the speed of your machine to “600” stitches per minute.

To Remove:

1. Remove the material from the hoop.
2. Trim away as much of the stabilizer as possible (save those pieces!).
3. Rinse the embroidery in room temperature, running water until all the stabilizer is dissolved.

Laundering and Care:

Launder and dry the item according to the fabric material fiber content.

The post Rinse Away Mesh appeared first on RNK Distributing.